LynnBlakeGolf Forums

LynnBlakeGolf Forums (http://www.lynnblakegolf.com/forum/index.php)
-   The Golfing Machine - Basic (http://www.lynnblakegolf.com/forum/forumdisplay.php?f=16)
-   -   The Left Wrist is Clubface Control (1-L) (http://www.lynnblakegolf.com/forum/showthread.php?t=4682)

DOCW3 05-05-2007 08:42 PM

The Left Wrist is Clubface Control (1-L)
 
I am struggling with Clubface Control. What about the Left Wrist is Clubface Control?

Reference:
*…A complete definition can only be the sum of the comments about it (1-H)
* The Machine has three functions--to control the Clubshaft, Clubhead and Clubface (1-L)
* Bending the Left Wrist makes Clubface alignment erratic (2-D-0)
*Direction Control means Clubface alignment control (2-G)
*...the proper horizontal motion of the Clubface controls its alignment during impact………(2-G)
*Some players even intentionally execute Impact as exclusively a Swivel, making Clubface alignment extremely fleeting and erratic (2-G).
*….”Roll” is actually imparted by the turning torso and/or the orbiting Arms (2-G)
*Clubface alignment at Impact Fix must fit the selected Hinge Action (2-J-1)
* The key to control of the Golf Club is Educated Hands (4-0)
* Clubface Motion is Rotational Wrist Motion (4-0)
* Turn and Roll are Rotational Wrist Motions (4-C-0)
* Clubface alignment at Impact is a function of the Hands executing the Clubface Motion--Accumulator #3 (4-D-0)
*Have a clear picture of the Impact Hand Position all the way down--NOT the process of achieving it
(4-D-0).
*..basically, Accumulator #3 Hand Motion is Clubface Control,…..(6-B-3-0)
*..for Impact Clubface alignment control, Hitters should rotate their Grip but not their Plane Line at Address, while Swingers should rotate their Plane but not their Grip (7-2)

6bmike 05-05-2007 09:49 PM

Prepare to Roll
 
The Left Hand throws out the clubhead with #2 acc and transfers the power with #3 acc. The LH performs all clubface control from uncock, Roll, Hinge and Swivel. The Right Hand’s only concern is mashing down onto the ball. It controls the clubhead.

Check out Lynn’s Swivel video clip- it is all Left Hand Roll. Whether a snap release or a sweep release, the Right Hand should not control the clubface guidance. That is Steering.
A Swinger really needs to incubate the feel of the left hand rolling. This was a breakthrough for me- and not an easy one. Hinge action is ALL left hand control. Your Pressure points END at impact- don’t let #3 PP throw-away your clubface.

Why bother after impact? Check out the Swivel video (watch Lynn Swing)- why bother? Because you must prepare to roll and produce a Hinge Motion before impact and with the Left Hand.

DOCW3 05-14-2007 07:14 PM

Left Hand
 
I was familiar with the swivel video clip but have replayed it repeatedly. Is there a book reference that you would emphasize or add to my list? Also, it was observed that the course outline for the Las Vegas Academy included "Hitting (drive out) Vs Swinging (throw out).

Thanks for the response.

Bagger Lance 05-14-2007 07:51 PM

Flailing Around
 
Doc,

Study the function of the Flail in 2-K.
I didn't see that on your list.

As you've read in 2-G the clubface mirrors the rolling (or non-rolling) flat left wrist through impact.

In that respect you don't need to monitor the clubface, but rather the hand motion.

DOCW3 05-28-2007 05:59 PM

Hinge Action
 
In Hinge Action Part 1 in the Gallery Yoda says the primary hinge controls the face. I am now reviewing Chapter 2 of the Archives.

bts 05-29-2007 07:09 AM

The function of the machine.
 
The Machine has only one function--to execute the program.

Bending the Left Wrist is part of the vertical hinging.

Direction Control means Clubface and/or stance alignment control .

….”Roll” is actually imparted by the inertia of the club and turning torso and/or the orbiting Arms.

The key to control of the Golf Club is Newton's Laws of Motion.

Clubface Motion is Rotational Wrist Motion and forearm motion.

Turn and Roll are Rotational Wrist Motions and forearm motions.

Have a clear picture of the finish Position all the way down and up and back--NOT the process of achieving it.

..basically, the inertia of the club is Clubface Control,…..

Bagger Lance 05-29-2007 09:52 AM

Veneer Control
 
Quote:

Originally Posted by bts (Post 42053)
The Machine has only one function--to execute the program.

Bending the Left Wrist is part of the vertical hinging.

Direction Control means Clubface and/or stance alignment control .

..basically, the inertia of the club is Clubface Control,…..

Just a few corrections.
The left wrist never bends. Its motion is to cock and uncock only. Vertical Hinging does not include a bent left wrist.

Direction control means clubface alignment control per the left wrist. 1-L-C. The clubface controls the direction and can either be open, square, or closed to the plane line. Through impact the clubface can close, hood, or layback. Hooding is not an effective alternative which leaves closing and layback.

Singular or combinations of those two motions correspond to the three hinge actions; That is "Closing" without "Lay-back." (Horizontal Hinge) (10-10-D) "Lay-back" without "Closing" (Vertical Hinge) (10-10-E) and simultaneous "Closing" and "Lay-back" (Angled Hinge) (10-10-C).

Stance is just one of many elements that assist in direction, but is not at all mandatory.

Based on the context of your response, using inertia ALONE for clubface control is a Pivot Controlled Hands procedure. It's not something we recommend here primarily because Homer said it was an inferior procedure.

Please clarify for me if I'm mistaken about what you teach.

bts 05-30-2007 03:24 AM

Sorry.
 
Quote:

Originally Posted by Bagger Lance (Post 42058)
Just a few corrections.
The left wrist never bends. Its motion is to cock and uncock only. Vertical Hinging does not include a bent left wrist.

Direction control means clubface alignment control per the left wrist. 1-L-C. The clubface controls the direction and can either be open, square, or closed to the plane line. Through impact the clubface can close, hood, or layback. Hooding is not an effective alternative which leaves closing and layback.

Singular or combinations of those two motions correspond to the three hinge actions; That is "Closing" without "Lay-back." (Horizontal Hinge) (10-10-D) "Lay-back" without "Closing" (Vertical Hinge) (10-10-E) and simultaneous "Closing" and "Lay-back" (Angled Hinge) (10-10-C).

Stance is just one of many elements that assist in direction, but is not at all mandatory.

Based on the context of your response, using inertia ALONE for clubface control is a Pivot Controlled Hands procedure. It's not something we recommend here primarily because Homer said it was an inferior procedure.

Please clarify for me if I'm mistaken about what you teach.

Sorry, that's not what I use and teach. And, again, mine is "LAG-controlled-pivot".

Things can get out of control, if wrong things get controlled.

12 piece bucket 05-30-2007 11:53 AM

Bending the Left Wrist can be a procedure though if you use it intentionally . . . and it can be DEADLY.

Bagger Lance 05-30-2007 12:18 PM

The Big Break
 
Quote:

Originally Posted by 12 piece bucket (Post 42083)
Bending the Left Wrist can be a procedure though if you use it intentionally . . . and it can be DEADLY.

You are right and I stand corrected.
:idea1:
How about the next time we hook up, you can stand 6 feet in front of me and I'll hit a soft lobber from a tight lie over your head with a flat left wrist? :cool:

The one I have trouble with is Seve's famous "flip the clubface" under the ball and catch it. As much as I hate the thought of flipping, I'll try that one too if you'll stand in front of me. :eyes:


All times are GMT -4. The time now is 01:08 PM.