![]() |
snap release how I changed my random sweep to snap
Went feom an early release to maximum trigger delay it actually was very gradual there was no aha moment it very slowly delayed more and more the only way is to ingrain the swinginfg action and eliminate all right hand arm effort and let the right arm steaighten passively also note that I gained little to no more distance but sometimes a more solid hit
http://www.youtube.com/watch?v=1GEbY2rN1Ns |
Quote:
|
Quote:
Deliberately delaying uncocking requires hand/wrist/arm tension and you can't let go the tension fast enough, so the uncocking is slower. :thumbdown Forearms, wrists, and hands must be tension free from the top. |
Quote:
|
Quote:
You can't get a real snap release by holding the angle with wrist tension and letting go at some point. The angle is held by directing PP #3 toward a suitable aiming point with tension free wrists and an adequate pivot speed. So what you call a snap release will give a random sweep if you let go too soon, but if you attempt to let go as late as would happen in a real snap release, you will have wrist tension which will result in a shaft speed slower than it would have been in a real snap release. In other words, it happens too fast in reality to fake it, because your brain signals can't be processed fast enough. |
Sorry to butt-in. But "Snap Release" is a Term Used to describe "how far along the straight-line delivery path when the Pulley begins or is initiated". It's not a #2 PP Swing. It's a #3 PP Swing. Driving Right Forearm. At the Very End of the Straight Line Delivery Path, when there is no more straight path to continue, the Right Forearm/Hands meet the Pulley. Then, the Right Forearm "Snaps" into the Pulley.
The #2 PP Swing (Wrist Cock) focuses on Wrist Cock and Uncock. This is the Swing used when you want to feel like the Left Arm is "Blasting" off the Chest. This Blast off the Chest initiates "Throw-Out" and CF sets in to Uncock the Left Wrist. It Doesn't get a "Snap" Release. With this Swing Type, you don't feel the Straight Line Delivery Path because the Right Forearm is Passive (Alignment aid only). Hence, Random Sweep Only when using the #2 PP (90% of Golfers). BOTH, the Straight Line Delivery Path and "Left Arm Blast Off the Chest" are the "Hand Acceleration" Phase (of the downstroke acceleration sequence). Pulley, is Clubhead acceleration. Controlling when "Clubhead Acceleration" begins is directly controlled only when using the #3 PP to sense Inertia and Acceleration. It is only indirectly controlled when using a #2 PP Swing. |
Quote:
|
There is much more to the Straight Line Delivery Path than the Curved Path of the Hands argument. It's a "Turned Shoulder Plane", 3 Stage Downstroke Acceleration procedure. As opposed to the Elbow Planes 2 Stage Acceleration procedure.
On the simplest level, it means that the Hands are traveling a Straight Plane and not Shifting Planes. On a more complex level, it's the Power Package Shift from Right To Left, Down Plane, without Straightening the Right Arm. During this Shift, Hand Acceleration, the Power Package maintains the Same Alignment as it assembled at the End of the Backstroke. Let me ask a question: Can you have a "Snap Release" if the Ball is located in the Center of your Stance? |
snap release make ball go far
|
Ok. Let me ask this please...the TGM definitions of snap vs random sweep release refer to reality, correct? Meaning what's actually happening? So intent is I material as far as definitions are concerned?
So MJ and Daryl are talking about the HOW to achieve these realities--snap vs random sweep? So MJ you're saying Snap Release with max potential CH speed is only possible by keeping PP3 with R shoulder speed and R elbow bent? How about aligning the shaft with the shoulder rotation (plane where shoulder rotates) from Startdown to Downstroke, so you have only longitudinal acceleration on the shaft, hence no Release/PA2 uncocking/keep angles without tensioning the wrists? At Release just fire PP3/PA1? Wouldn't that be Snap Release without tensioning the wrists? MJ? IMO I'd agree more with Daryl. What I said above jives with the last 2 posts of Dsryl...I think. Daryl? |
| All times are GMT -4. The time now is 09:26 PM. |