Pivot center - LynnBlakeGolf Forums

Pivot center

Golf By Jeff M

 
 
Thread Tools Display Modes
  #1  
Old 12-22-2008, 04:47 PM
no_mind_golfer no_mind_golfer is offline
Senior Member
 
Join Date: Oct 2008
Posts: 118
Originally Posted by O.B.Left View Post
Here you go.

Now this looks excessive.

http://www.lynnblakegolf.com/forum/a...d=122997808 9

Boy Howdy.... That's some massive toe down deflection.. was he playing hickory?
  #2  
Old 12-22-2008, 05:10 PM
golfbulldog golfbulldog is offline
Senior Member
 
Join Date: Dec 2005
Posts: 647
Originally Posted by no_mind_golfer View Post
Boy Howdy.... That's some massive toe down deflection.. was he playing hickory?
NM - you agree with Jorgensen re. shaft flex behaviour in downswing?

He concludes (from examining the shaft behaviour of one golfer) that the "flexing of the shaft forward as the clubhead comes in to hit the ball is a general characteristic of the golf swing. Photographs made with the use of a focal plane shutter must be ignored in this context. There are few photgraphs in the golf literature made with stroboscopic light sources, but of those I have examined, all of them show clubs flexed in this manner"

So exclude focal plane shutters and some video cameras ...before theorising too much about shaft flex photos .
  #3  
Old 12-22-2008, 05:57 PM
no_mind_golfer no_mind_golfer is offline
Senior Member
 
Join Date: Oct 2008
Posts: 118
Noodle shafts
Originally Posted by golfbulldog View Post
NM - you agree with Jorgensen re. shaft flex behaviour in downswing?

He concludes (from examining the shaft behaviour of one golfer) that the "flexing of the shaft forward as the clubhead comes in to hit the ball is a general characteristic of the golf swing. Photographs made with the use of a focal plane shutter must be ignored in this context. There are few photgraphs in the golf literature made with stroboscopic light sources, but of those I have examined, all of them show clubs flexed in this manner"

So exclude focal plane shutters and some video cameras ...before theorising too much about shaft flex photos .
Well........ (deep subject I know)

I think Ted jorgensen did a good job and I strongly agree with is concern re interpreting photographs... but its been a while since I read his book... I'm not sure what he means by that statement.

On the matter of club shaft flexing I agree with Wishon (inertial loading from the top is generally speaking in the wrong plane to contribute CH speed at impact due to "snapping back" and I agree with Sasho MacKinsey : http://library2.usask.ca/theses/avai...ted/Thesis.pdf

who says basically shaft bend is mostly toe down and forward (which adds dynamic loft to the club head) as a result of the centripetal force pulling towards the instantaneous center of rotation against the club head's inertia . Its act on the CG of the clubhead. Imagine you could tie a string to the CG of your clubhead and then you did a tug of war.... the shaft would bend like we see in the pictures (toe down and forward)

Post impact all bets are off.... other dynamics come into play as the club rapidly decelerates. But we should not care what happens after the ball is gone IMHOP.


BTW... I'd sure like to see some equip mfg.s do that (design a driver that had the hossel in-line with cg of the clubhead.... There would be whole lot less bending going on I bet... more consistent shots for sure... No more toe down , closing of the face, dynamic lofting etc. .... just a thought. Probably would look funny though and nobody would buy it..

Last edited by no_mind_golfer : 12-22-2008 at 06:03 PM. Reason: adding some stuff.
  #4  
Old 12-22-2008, 06:50 PM
Dariusz J.'s Avatar
Dariusz J. Dariusz J. is offline
Member
 
Join Date: Oct 2005
Location: Poland
Posts: 60
Gents, it is about the TORQUE of the shafts, not about the FLEX. If someone witnesses a shaft phenomenon that looks like Hogan's in 'Power Golf' it mainly means that the torque index of such a shaft is too high for the swing parameters. Granted, usually, the flexier the shaft, the higher is the torque, even nowadays, but if the technology permits someday to invent a flexible shaft with a very low torque - why not soon as we are in the nanotechnology era - it would be a dream for clubfitters.
Such a shaft won't look like this as well as late Hogan's "telephone pole" shafts never looked like his pre-secret shafts. IMHO, what Hogan really wanted was low torque, not overhuman stiffness - but in his times it was impossible to tear those two issues apart and he ended with extremely stiff shafts that gave him the torque low enough.
Associate this with the clubheads CoG in relation to the shaft end in a rapid rotary motion and you will have the answer why the clubhead motion can simultaneously rotate and bend the shaft.

Cheers
__________________
Dariusz
  #5  
Old 12-22-2008, 07:05 PM
no_mind_golfer no_mind_golfer is offline
Senior Member
 
Join Date: Oct 2008
Posts: 118
Torque is axial.... Bending is longitudinal Are you saying you see torsion in this photos? I'm not following you.

Originally Posted by Dariusz J. View Post
Gents, it is about the TORQUE of the shafts, not about the FLEX. If someone witnesses a shaft phenomenon that looks like Hogan's in 'Power Golf' it mainly means that the torque index of such a shaft is too high for the swing parameters. Granted, usually, the flexier the shaft, the higher is the torque, even nowadays, but if the technology permits someday to invent a flexible shaft with a very low torque - why not soon as we are in the nanotechnology era - it would be a dream for clubfitters.
Such a shaft won't look like this as well as late Hogan's "telephone pole" shafts never looked like his pre-secret shafts. IMHO, what Hogan really wanted was low torque, not overhuman stiffness - but in his times it was impossible to tear those two issues apart and he ended with extremely stiff shafts that gave him the torque low enough.
Associate this with the clubheads CoG in relation to the shaft end in a rapid rotary motion and you will have the answer why the clubhead motion can simultaneously rotate and bend the shaft.

Cheers
  #6  
Old 12-22-2008, 07:22 PM
Dariusz J.'s Avatar
Dariusz J. Dariusz J. is offline
Member
 
Join Date: Oct 2005
Location: Poland
Posts: 60
Try to imagine what would happen with a shaft that is subject to the head's CoG movement that is located where it is in relation to the axis of the shaft = each other are not in line in any of the three dimensions. Pay special attention to where the clubhead's CoG is in relation to the shaft.
That's why I said to try to associate those two things together in a 3-D reality.The shaft always is re-torquing in the downswing, same as torquing up in the backswing (due to the forearm rotation). Somewhere in the motion (depending on the ability of maintaining lag, I guess) the shaft must re-torque down and it dos not stop in the original position but goes further due to the inertia, making the shaft turn around its axis and bow simultaneously.

Cheers
__________________
Dariusz
  #7  
Old 12-22-2008, 07:29 PM
Yoda's Avatar
Yoda Yoda is offline
Administrator
 
Join Date: Jan 2005
Location: Atlanta, Georgia
Posts: 10,681
Clubhead Throwaway . . . Not!
Originally Posted by BerntR
While it is biomechanical possible to maintain the clubhead speed through impact it is impossible to maintain the brute force moment from image 1 all the way through. And when the moment decreases , the shaft starts to release. And since the club is a highly resonant system with moderate inner damping, the club will now whip forward - as it does here. This is not an ideal occurence since it means that stored energy is released long before impact. It is kind of similar to the dreaded throwaway. But given how we are built it is perhaps unavoidable in a swing that starts hard and fast down.
Originally Posted by O.B.Left View Post
Here you go.

Now this looks excessive.

Originally Posted by no_mind_golfer View Post

Boy Howdy.... That's some massive toe down deflection.. was he playing hickory?

Thanks, O.B. Left. We will use your upload and contrast with my own image in my post #202 (and its exception).



__________________
Yoda
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 06:43 AM.


Design by Vjacheslav Trushkin, color scheme by ColorizeIt!.